Books (4)
- 1. Md. Jahidul Haque, and M.S. Rahman; "Bio degradation of Industrial Materials", Handbook of Biodegradable Materials, pp 1407-1448, Springer Publisher, Online ISSBN:978-3-031-09710-2, First Online, 21 Feb.2023., 2023
- 2. Md. Jahidul Haque, Zahidul Islam, Ahmed Sidrat Rahman Ayon, Akib Jabed, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Mst. Esmotara Begum, M. Humayan Kabir, M. Mintu Page 7 of 12 Ali, M. Abdul Kaiyum, and M. S. Rahman; "Usage of Bionanomaterials in Production of Solar Energy", Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774912010, 2022
- 3. Md. Jahidul Haque, Ahsan Habib Munna, Ahmed Sidrat Rahman Ayon, Zarin Rafa Shaitee, Sanzana Tabassum Proma, Sadia Akter, Tasnuva Humaira, Humayan Kabir, Mintu Ali, Abdul Kaiyum, and Shamimur Rahman; "Advanced Nanomaterials for Dentistry, Sustainable Nanomaterials for Biosystem Engineering Impacts, Challenges, and Future Prospects", Apple Academic Press & CRC Press (Tailor & Francis Group), ISBN: 9781774910665, 2022
- 4. Abdullah Al Mahmood and Shamimur Rahman; "Ceramic Raw Materials - Different Clays", LAP LAMBERT Academic Publishing, ISBN-13: 978-3-330-05396-0, ISBN-10: 3330053968, EAN: 9783330053960, 2017
Journal Articles (27)
- 1. Anik Molla, Md. Minhazul Hoque, M. Humayan Kabir, Shah Sadia Rahman Joya, Safaet Alam, Firoz Ahmed, Nazim Uddin Ahmed, Md. Aminur Rahman, Hajara Akhter , M.S. Rahman; "Biosynthesis of ZnO and Ag-doped ZnO nanoparticles using Citrus sinensis (orange) peel extract: A comprehensive investigation of the effect of silver (Ag) on the structural, photocatalytic, and antibacterial properties", ELsivier, Materials Today Communications 50 (2026) 114595, 2025
- 2. Shah Sadia Rahman Joya, Sanjida Nusrat Prerona, M. Humayan Kabir, Anik Molla, Md. Faruk Hossain and M.S. Rahman; "Eco-Friendly Synthesis of ZnO and Ag-doped ZnO Nanoparticles using Onion Peel Extract.: Characterization and Comparative Analysis", Journal of Chemistry Select, Accepted on 11 August, 2025, 2025
- 3. Munjar Hafiz, M. Humayan Kabir, Suhanur Rahman, M. M. Rashid, Md. Saifur Rahman, Habibur Rahman, M. Mintu Ali, M. Jahidul Haque & M. S. Rahman; "Investigation of The Effect of Gallium (Ga) On Properties of Zinc Oxide (ZnO) Thin Films Prepared by Spray Pyrolysis Technique", Journal of Optics, 21 March 2024, Volume 53, pages 4950–4960, 2024
- 4. Hasnat Jahan Sumona, Abdullah Al Mahmood Jahid Hasan Kasem, M.S. Rahman , M. Bodiul Islam,; "Modification of structural, morphological, and dielectric properties of barium calcium titanate ceramics with yttrium addition", Heliyon, Volume 10, Issue 5, 15 March 2024, e27124, 2024
- 5. Md. Kamruzzaman, Maruf Hassan Nishat, Md. Mintu Ali, M. Humayan Kabir, M S Rahman; "Influence of multi-doping (Zn and Sn) on the optical, and electrical properties of spray-deposited CdO thin films", PHYSICS b, Condensed Matter, Volume 690, 1 October 2024, 416270., 2024
- 6. Md. Mintu Ali, M. Humayan Kabir, Md. Shamimur Rahman; "Exploration of optical and frequency dependent electrical properties of boron-cobalt co-doped ZnO thin films", Optical Materials 148, 17 January 2024, 114949., 2024
- 7. M.F.I. Al Imam, R.A. Beg, M.J. Haque, M.S. Rahman; "Effect of novel phase change material (PCM) encapsulated design on thermal performance of solar collector", Results in Materials, Elsevier, Volume 18, June 2023, 100388, 2023
- 8. M. Humayan Kabir, Munjar Hafiz, Suhanur Rahman, Md. Saifur Rahman, Habibur Rahman, M. M. Rashid, Md. Faruk Hossain, M. Mintu Ali, M. Jahidul Haque, M. K. R. Khan & M. S. Rahman; "Effect of Ga doping on structural, morphological, optical and electrical properties of CuO thin films deposited by spray pyrolysis technique", Mater Sci: Mater Electron 34, 1258 (2023), 2023
- 9. M Humayan Kabir, Munjar Hafiz, Shamima Akhter Urmi, M Jahidul Haque, M Mintu Ali, Md Saifur Rahman, MKR Khan, M S Rahman; "Effect of Ga doping on microstructure, morphology, optical and electrical properties of spray deposited CdO thin films", Optical Materials Volume 125, March 2022, 112123, 2022
- 10. M. Mintu Ali, Md. Jahidul Haque, M. Humayan Kabir, M. Abdul Kaiyum and M. S. Rahman; "Nano synthesis of ZnO–TiO2 composites by sol-gel method and evaluation of their antibacterial, optical and photocatalytic activities", Results in Materials Volume (Elsevier), Vol. 11, 100199, 2021
- 11. Golam Mowla, Nabid Hossain, M. Humayan Kabir, M. Jahidul Haque, M. Mintu Ali, M. Abdul Kaiyum, M. S. Rahman; "Structural, electrical, and magnetic characterization of (1-x)BaTiO3-xNi0.6Zn0.4Fe2O4 multiferroic ceramic composites", Materials Engineering Research, Vol. 3, Issue 1, 2021
- 12. M. Abdul Kaiyum, M. Humayan Kabir, Md. Mintu Ali, M. Shamimur Rahman; "Effects of Iron Doping on Properties of TiO2 Thin Film Prepared by Spin Coating Method", Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques 15(6):1225-1231, 2021
- 13. M. Golam Mortuza Nion, M. Humayan Kabir, Marjanun Akter Mona, M. Jahidul Haque, Nayem Shahariar, Munjar Hafiz, M. S. Rahman; "Effect of Al doping on morphology and optical properties of spray pyrolized MgO thin films", Results in Materials Volume (Elsevier), Vol. 12, 100199, 2021
- 14. M. Humayan Kabir, Antara Bhattacharjee, M. Manjorul Islam, M. S. Rahman, Md. Saifur Rahman & M. K. R. Khan; "Effect of Sr doping on structural, morphological, optical and electrical properties of spray pyrolized CdO thin films", Journal of Materials Science: Materials in Electronics volume 32, pages 3834–3842, 2021
- 15. M. Mintu Ali, M Nion, M S Rahman; "Effects of Binder on Physical and Mechanical Properties on Unglazed Ceramic Tiles", Journal of Engineering and Applied Science Vol. 4, No. 1, pp. 42–51, 2020
- 16. Tasmia Zaman, Md Khairul Islam, Md Abdur Rahman, Arman Hussain, Md Abdul Matin, Md Shamimur Rahman; "Mono and co-substitution of Sr2+ and Ca2+ on the structural, electrical and optical properties of barium titanate ceramics", Ceramics International Volume 45, Issue 8, 1 June 2019, Pages 10154-10162, 2019
- 17. M.A. Kaiyum; S. Rahman; "Investigation of Physical Properties of Locally (Rajshahi, Bangladesh) Available Clay", Journal of Advances in Geotechnical Engineering: 2 pp. 1-5 (3), 2019
- 18. M Humayan Kabir, M Mintu Ali, M Abdul Kaiyum and M S Rahman; "Effect of annealing temperature on structural morphological and optical properties of spray pyrolized Al-doped ZnO thin films", Journal of Physics Communications 3 (10), 105007, 2019
- 19. T. Zaman, Mst. S. Mostari, Md. A. Al Mahmood, Md. S. Rahman; "Evolution and characterization of eggshell as a potential candidate of raw material", Ceramica 64(370):236-241, 2018
- 20. M.Humayan Kabir, M.Al amin, M.S.Rahman and M.K.R.Khan; "Influence of Al doping on microstructure, morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere", Chinese journal of physics 56 (5), 2275-2284), 2018
- 21. Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Aminul Islam; "Effect of Al Doping on Thickness, Optical, Morphological and Structural Properties of TiO2 Thin Film Prepared by Spin Coating Method", Journal of Thin Films Research, Volume 1,Issue 1,2017 Pages 17-19, 2017
- 22. Shamimur Rahman, Abdullah Al Mahmood; "Solution for Raw Material Crisis in Bricks and Tiles Manufacturing Industries", International Journal of Latest Trends in Engineering and Technology, Vol. 8, No. 2, 2017, pp. 120-127, 2017
- 23. Abdullah Al Mahmood, Shamimur Rahman, Omar Faruque, Tanmoy Kishor; "Comparative Analysis of Ceramic Product Manufactured from Traditional Raw Materials and Local Raw Materials in Bangladesh", Engineering International, ISSN: 2409 -3629, Volume: 04 No.01, Dec -2016, pp. 41-48, 2016
- 24. Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Effect of substrate bias voltage on fretting fatigue behaviour of ceramic film deposited on Ti-6Al-4V alloy", International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 250-253, 2014
- 25. Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Crack initiation and fatigue behaviour evaluation of ceramic film deposited on Ti-6Al-4V alloy", International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 246-249, 2014
- 26. M.S. Rahman, S. Tanimoto, D Yonekura and R. Murakami; "Influence of the Substrate Bias Voltage on Fretting Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy", International Journal of Modern Physics B, Vol. 25, issue 12, pp. 1567-1576, 2011
- 27. Md. Shamimur Rahman, Takeshi Katsuma, Daisuke Yonekura, Ri-ichi Murakami; "Evaluation of Crack Initiation and Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy", International Journal of Modern Physics B, Vol. 24, Issue15-16(2010), pp. 2502-2506, 2010
Conference Papers (27)
- 1. Md. Shamimur Rahman, Md. Abdul Ahad, Quazi Nazmul Arefin Sium, and Sadia Samanta and; "Effect of Fishbone Ash on the Physical and Mechanical Properties of Artificial Teeth", International Conference on Mechanical Engineering and Renewable Energy (ICMERE) 2025, 2025
- 2. M. Golam Mortuza Nion, Hasnat Jahan Sumona, M.S. Rahman; "Formulation of Glass-Ceramic Glaze from Recycled Glass Waste to Enhance the Mechanical, Thermal, Optical and Chemical Properties of Ceramic Tiles", International Conference on Mechanical, Industrial and Materials Engineering, ICMIME2024, 11-13 December, 2024, 2024
- 3. Md Khairul Islam*, Md Shamimur Rahman, Shamima Akhter Urmi, Abdullah Al Mamun, and Joyen Uddin; "Fabrication of Lanthanum doped Calcium Copper Titanate (CCTO) Electroceramic for Energy Storage Application", Paper ID: ICSED2023-41 International Conference on Sustainable Engineering Development (ICSED-2023) 24-25 May 2023, DUET, Gazipur, Bangladesh, 2023
- 4. Md Khairul Islam*, Md Shamimur Rahman, Shamima Akhter Urmi, Abdullah Al Mamun, and Joyen Uddin; "Study of the Morphological, Electrical and Optical Properties of Ca4SrCu3Ti4O12 Ceramic.", 7th International Conference on Chemical Engineering (ICChE 2023) 20-22 December 2023, Dhaka, Bangladesh, 2023
- 5. M. Mintu Ali, Md. Jahidul Haque, Subhro Roy, Md. Nafiul Islam Sarker, Ariful Bari Rifat, Showvik Saha, M. Humayan Kabir, M S Rahman; "A Comprehensive Review Regarding the Technological Development of ZnO Thin Films From 2018 To 2021", 4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022), 2022
- 6. M. Mintu Ali, Md. Jahidul Haque, Md. Zahurul Islam, M S Rahman; "A Prospective Review on Dense and High Ionic Conductivity of LSGM Electrolytes Sintered at Lower Temperature through Different Routes", 4th International Conference on Physics for Sustainable Development and Technology (ICPSDT-2022), 2022
- 7. Md. Mintu Ali, B.A.Johan, M. Shohan Ali, M. Humayan Kabir, M.A. Kaiyum, M. Khairul Islam, M. S Rahman; "Physio-Mechanical behavior of different types of local and imported clays as a raw material used in traditional ceramic body preparation", International Conference on Materials, Energy, Environment and Engineering (ICMEEE), 2020
- 8. Shamima Akther Urmi , G. M. Sadrul Islam, Mainul Islam , M. S. Rahman; "Manufacturing & Characterization of Glass Samples with Three Different Sources of Silica: Possible Alternatives for Quartz in Glass Manufacturing", International Conference on Materials, Energy, Environment and Engineering (ICMEEE), 2020
- 9. Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Mintu Ali; "Enhancement of Fatigue Behavior of PVD Coated Ceramic Thin Film Deposited on Titanium Alloy", International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2019) 17-19 December, 2019, RUET, Rajshahi, Bangladesh, 2019
- 10. M.Humayan Kabir, M N A Chowdhury and M.S.Rahman; "Effect of Annealing on Physio-Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique", 5th International Conference on Engineering Research, Innovation and Education (ICERIE 2019), 2019
- 11. M. A. A. Mahmood, T. Zaman, M. S. Rahman and M. J. Abedin; "Using Analytical Hierarchy Process for Optimization of Gas Metal Arc Welding (GMAW) Parameters", International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2014), 2014
- 12. M. A. A. Mahmood, M. S. Rahman, T. Zaman; "Comparison of Welding Effect on Tensile Strength and Hardness of Mild Steel and Cast Iron", International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013), 2013
- 13. Md. Forhad Ibne Al Imam, Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Influence of Heat treatment on Fatigue and Fracture Behavior of Aluminum Alloys", International Conference on Engineering Research, Innovation and Education (ICERIE-2013), 2013
- 14. M. A. A. Mahmood, M. S. Rahman and Tasmia Zaman; "Ceramics in Bangladesh: Its Recent Evolution and Future Prospect", International Conference on Mechanical, Industrial and Materials Engineering (ICMIME-2013), 2013
- 15. M. S. Rahman, M. A. A. Mahmood, and T. Zaman; "Potential Use of the Clay from the Dead River Isamati", International Conference on Climate Change Impact and Adaptation (I3CIA) Center for Climate Change and Sustainability Research (3CSR), 2013
- 16. M. S. Rahman, M. A. A. Mahmood, T. Zaman, and M. J. Abedin; "Optimization of Process Parameters in MIG Welding by Using Analytical Hierarchy Process", International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2013), 2013
- 17. Md. Forhad Ibne Al Imam, Md. Shamimur Rahman, Md. Abdullah Al Mahmood; "Influence of Heat Treatment on Fatigue and Fracture Behavior of Aluminium Alloys", International Conference on Engineering Research, Innovation and Education (ICERIE 2013), 2013
- 18. Md. Shamimur Rahman, Daisuke Yonekura, Takeshi Katsuma, and Ri-ichi Murakami; "Effect of Bias Voltage on Fatigue Behavior of CrN Film Deposited on Ti-6Al-4V Alloy", 2008 ASME International Conference on Manufacturing Science and Engineering (MSEC_ICM&P2008) Paper no-72441, pp. 169-174, October 7-10, Evanston, IL, USA, 2009
- 19. M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi; "Emission Characteristics of a DI Diesel Engine with Bio-fuel", International Conference on Mechanical Engineering' 2005, (ICME2005) 28-30 December 2005, Dhaka, 2005
- 20. Md. Nurun Nabi, Mhia Md. Zaglul Shahadat , Md. Shamimur Rahman, and Mohd. Rafiqul Alam Beg; "Behavior of Diesel Combustion and Exhaust Emission with Neat Diesel Fuel and Diesel-Biodiesel Blends", SAE International conference, October 27-31, 2004 Paper No. 2004-01-3034, pp. 1-8. USA, 2004
- 21. M.S Rahman, M.R.A. Beg, and M.N. Nabi; "Performance Study of A Diesel Engine with Esterified Vegetable Oil", 4th International Mechanical Engineering Conference and 9th Annual Paper Meet, 29-31 December, 2004, Dhaka, Bangladesh, 2004
- 22. M.S Rahman, M.N. Nabi, and M.R.A. Beg; "Performance Study of A Diesel Engine with Diesel-Vegetable Oil Blends as Alternative Fuel", 2nd BSME-ASME International conference on Thermal Engineering, 2-4 January, 2004, Dhaka, 2004
- 23. M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi; "Investigation of Exhaust Emission of a DI Diesel Engine with Biodiesel", 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 2004
- 24. Md. Nurun Nabi, Md. Shamimur Rahman, Mohd. Rafiqul Alam Beg, Md. Sakhawat Hossain, and Md. Sazzadul Faruki; "Characterization of Different Vegetable Oils Available in Bangladesh", 3rd International Conference of Mechanical Engineers (ICME) and 8th Annual Paper Meet, 20-22 March, 2003, Dhaka. Paper no. 10, pp. 67-76, 2003
- 25. Nurun Nabi, Shamimur Rahman, and Rafiqul Alam Beg; "Fundamental Properties of Different Vegetable Oils Available in Bangladesh", SAE International conference, Pittsburgh, Pennsylvania USA, October 27-30, 2003, 2003
- 26. R.A. Beg, M.S. Rahman, P.K. Bose, and B.B. Ghosh; "Performance Studies on Semi-Adiabatic Diesel Engine Using Vegetable Oil as Fuel", SAE International conference, San Diego, California USA, October 21-24, 2002. Paper no. 2002-01-2692, 2002
- 27. Murari Mohon Roy and Md. Shamimur Rahman; "Improvement in Odor Assessment procedure in DI Diesel Engines", International conference on Thermal Engineering, 31 December, 2001-2 January 2002, Dhaka, Bangladesh. pp. 544-551, 2002